Hey Gene,
Once you use Cleco's you'll never want to be without them again!! Primarily
intended to hold future riveted joints in alignment they've expanded the
catalog to include some nifty clamps as well. The system is so cheap why
bother
with no-name. Eastwood is pretty good stuff and probably Cleco anyway but I
bought 1/8 and 3/16 pins for about a buck each and the pliers were about
fifteen
Dollars. Probably Pegasus Racing but I don't remember for sure now.
Whatever you get, if you do any fabrication you'll LOVE them.
Steve in Las Vegas
<<
Listmembers:
Has anyone used the autobody panel fastening system for overlapping
panels that requires a 1/8 hole drilled through both panels and then a
removable "rivet" or "pin" device is installed with a special "rivet
gun" to keep the panels tight together. One brand was either Cleco or
Kleco. Eastwood makes a no-name brand set I was thinking of getting.
Anyone tried this set or can someone recommend a place to get a better
kit? Thanks,
Gene >>
|