shop-talk
[Top] [All Lists]

RE: bearing packing tool?

To: Randall Young <ryoung@navcomtech.com>, shop-talk@autox.team.net
Subject: RE: bearing packing tool?
From: Steven Trovato <strovato@optonline.net>
Date: Mon, 02 Jun 2003 20:56:32 -0400
Randall,

That's the way I was taught.  Always worked for me.  Of course, I think you 
get a far superior outcome by putting the grease in your right hand and 
gripping the bearing in your left. :-)

-Steve Trovato (lefty)
strovato@optonline.net

At 04:52 PM 6/2/03 -0700, Randall Young wrote:

>I must be missing something, perhaps someone can explain ... my technique is
>to get a layer of grease on my left hand, and grip the roller/inner race
>assy in my right hand, then use the edge of the cage to scoop up the grease.
>It will start to ooze out between the rollers, and eventually come out the
>far end between the cage and the inner race.  Then I shift to a new grip and
>do it again, maybe 4 or 5 times, until grease is oozing out the far end all
>the way around.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>