> The fact that you have "plenty of adhesive" left may indicate that you're
> not pressing it on hard enough? You don't want to squeeze out all of the
> adhesive, but with almost any adhesive, thinner is stronger.
That's exactly right, with this adhesive thinner is stronger. (Some epoxies
do have a minimum film thickness though.) It's also a good idea to hold
some firm pressure on it while it sets up. But don't go too overboard on
the pressure, it adds some permanent strain to the glass that may eventually
lead to cracking. BTDT
Randall
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|