shop-talk
[Top] [All Lists]

Re: Trailer jockey

To: Wayne <w.farrington@verizon.net>, Shop Talk
Subject: Re: Trailer jockey
From: Rush <jdrush@enter.net>
Date: Tue, 03 Apr 2001 14:51:34 -0400
Pallet Jack. http://www.powermoverinc.net/pallet%20jack.htm You can get a
hand pump one that will easily lift 700 pounds. I see used ones for sale
in industrial equipment auctions all the time. They are very
maneuverable, and you will find other uses in the shop. You should be
able to roll it with an armstrong motor as long as your slope is minimal.
You'd also have to be a little creative in making a cradle to pick up the
tongue wheel.  They do sell electric ones, but you generally need a
sophisticated charger for the industrial battery.

Jon

Wayne wrote:
> 
> I have a 22' travel trailer and a 20' car trailer that because of fairly
> frequent use and limited driveway space I find myself moving around
> occasionally. This would not be a problem except that I live on a vary narrow
> single lane private road that has a row of trees on the outboard side. My
> extended cab truck has a rather long wheel base. The driveway in front of my
> shop, while very wide, is also not very deep.
> 
> So, I was wondering if there was some sort of "trailer jockey" unit that would
> allow easier positioning of said trailers. I thought about maybe just getting
> another short wheelbase beater vehicle for this purpose but would rather not
> take up yet more parking space for something that was going to be used 2 or 3
> times a month.
> 
> Also thought about a small tractor but don't really have much other use for
> one around the place. Thought about trying to use my riding lawnmower but
> doubt it has the power, or the capacity to handle the tongue load, although
> there is very little grade involved in these movements. Maybe a battery
> powered stand up forklift but again, no other use for such a beast.
> 
> Or, maybe I could make something. Ideally this would be a walk behind unit,
> easy to store when not in use and have a small foot print. Maybe electric over
> hydraulic using hydraulic wheel motors with battery power. Or small lawnmower
> engine with chain drive to the wheels. Not sure if this one would provide
> enough control though.
> 
> Obviously this unit would have to take the tongue loads which are about ~700
> lbs. if I recall correctly. I suspect the car trailer actually has a higher
> tongue weight then the travel trailer. What with all the wheels and tires I
> have in the tire rack. Possibly using a large swivel caster on the bottom of
> the tongue jacks would help relieve some of this weight?
> 
> Anyway, thought I'd throw that out there for your ideas.
-- 
Yes, I know my message date is sometime in April 2001. Welcome to
my own personal version of the film Groundhog Day!

Babe! I got you Babe!

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>