Susan and Mark Miller wrote:
> Mcmaster Carr (www.mcmaster.com) has them at about $100-150. Or use a
>'normal'
> ratchet wrench and a scale. Pull on the wrench 6" from the fastener with 4
>pounds
> and you're there...
Can't you get a 3/8" in inch pounds and then just put a 3/8" to 1/4"
converter on it? I have a 3/8" 250 in-lb torque wrench, but it's a
clicker, not a beam, and if you want to maintain the proper torque,
could be difficult with that type, although not impossible.
cmh
--
Chris Heerschap - UNIX Systems Mutilator Ancoro imparo
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|