"George Columbo" <gcolumbo@Prodigy.Net> wrote:
>
> Lost remote entry transmitter (key fob).Bought used one from 94 Crown Vic.
> How do I program it to work on my car ?
Don't know if it will work on yours, but the process for remote door
lock/antitheft system on my '96 Ranger involved a lot of turning on
and off of the ignition key.
The guy at the service department couldn't remember exactly how,
bug he gave me the general idea, and I experimented.
If I remember it right, I had to turn the key off and on something like
5 times. Then either the dash light blinked of the horn "tooted"
(blinked/tooted). At that point, I had to push the key fob lock
button (It may have then blinked/tooted). You have to repeat
for each key fob as the system is erasing/relearning the codes.
Then after some short time (maybe 20 seconds) the system
blinked/tooted and it was done.
Hopefully, someone will have the exact procedure for your car,
but if nothing else, you could give it a try. The worst that will
happen is that you will erase and currently stored codes...
Tim Mullen
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|