There is one caveat I will add to your comment: " I have heard that wood
paneling is better in a garage than drywall, and putting it up with screws
allows easy access later, if necessary."
That certainly is the norm for a woodworking shop, but if you are dealing with
flames or heat (torch, welders, grinder, etc.) is would screw 5/8" drywall over
the plywood. Do not tape or over the screws, leave it so it could removed.
The advantage of the plywood walls is that you can not easily poke a hole in
it, and you can attach shelves, etc., anywhere.
Placing the thick drywall over it dramatically increases the fire resistance.
With the wood still underneath, it is still difficult to punch holes in the
wall, and you can still install shelves, etc.
Mark V.S. in Austin, TX
-----Original Message-----
From: LBC286@aol.com [mailto:LBC286@aol.com]
<SNIP>
The house has 200 amp service, with 60 amp service run from the main box to
the detached garage. There is a small electrical box in the garage with room
for about 6 (maybe 8) breakers. (I think.) This should be adequate, but the
rest of the wiring in the garage is a big mess. I will be removing all the
wires and installing all new wires, outlets, boxes, switches, flourescent
lights, etc., after I install the insulation and before I put in the
paneling. I have heard that wood paneling is better in a garage than
drywall, and putting it up with screws allows easy access later, if
necessary. Sounds like a plan!
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|