Larry
I have not seen such a listing in my 20+ years in the business. I
suspect that a rebuilder might have something like that. In every big city
there is at least one "R&R" rebuilder. Find one close to you and have a
conversation with the inhouse guru. You may already be at this stage.
Often they can take a case from one unit and combine it with a drive-end
housing from another and get to exactly what you need. But you have to find
the guy who is knowledgable and willing to take the time. Wouldn't hurt if
he is an enthusiast who would take a personal interest in your project.
Rex Burkheimer
J-CON Coordinator, WM Automotive Whse Fort Worth TX
Texas Region SCCA FC #19 SRX7 #39
rex@txol.net rex@ceoexpress.com
"There is pleasure sure in being mad which none but madmen know." John
Dryden
----- Original Message -----
From: Larry Hoy <larryhoy@prodigy.net>
To: Rex Burkheimer <rex@txol.net>; shop-talk <shop-talk@autox.team.net>
Sent: Saturday, February 12, 2000 10:29 AM
Subject: RE: Automotive "cross numbers"
> Here's another question about starters. Are there "charts"
> that show the dimensions of starters. You know, flange
> sizes, bolt hole center to center, # of gear teeth, etc?
>
> As rex points out "you aren't going to like it though". It
> would be nice to source a starter from a vehicle that is a
> bit more common.
>
> Larry Hoy
>
> > -----Original Message-----
> > From: shop-talk-owner@autox.team.net
> > [mailto:shop-talk-owner@autox.team.net]On Behalf
> > Of Rex Burkheimer
> > Sent: Saturday, February 12, 2000 8:09 AM
> > To: Larry Hoy; shop-talk
> > Subject: Re: Automotive "cross numbers"
> >
> >
> >
> > Found it. You aren't going to like it though.
> >
> > 16740 Isuzu 1981-84 I-Mark Diesel
> > Chevette 1982085 diesel
> >
> > New (rebuilt) price is about $130+. The core is
> > valued at $35.
> > We are a very large distributor. We have sold one
> > this year, and one last
> > year.
> > Probably more than you really wanted to know ;)
> >
> > What are you using it on?
> >
> > Rex Burkheimer
> > J-CON Coordinator, WM Automotive Whse Fort Worth TX
> > Texas Region SCCA FC #19 SRX7 #39
> > rex@txol.net rex@ceoexpress.com
> >
> > "There is pleasure sure in being mad which none
> > but madmen know." John
> > Dryden
> > ----- Original Message -----
> > From: Larry Hoy <larryhoy@Prodigy.Net>
> > To: Shop Talk <shop-talk@autox.team.net>
> > Sent: Saturday, February 12, 2000 1:54 AM
> > Subject: Automotive "cross numbers"
> >
> >
> > >
> > > I have an automotive gear reduction engine starter of
> > > unknown identity. I have the "listor" number,
> > or is that
> > > "Lestor" number? This number apparently is a cross
> > > reference number that can be searched by all parts
> > > suppliers. Good deal, that means I can replace
> > the starter,
> > > but what I'd really like to do is find out what
> > car it was
> > > installed in originally. Of course if you go
> > to the parts
> > > store they can't get from the number to the original
> > > application.
> > >
> > > Does anyone know how to do this?
> > >
> > > The number is 16740.
> > >
> > > Larry Hoy
> > >
> > >
> > >
> > >
> > >
> >
>
|