shop-talk
[Top] [All Lists]

RE: Batt. cutoff switch

To: LBC286@aol.com, "Mark J. Bradakis" <mjb@phase.cs.utah.edu>
Subject: RE: Batt. cutoff switch
From: "Randall" <ryoung@navcomtech.com>
Date: Wed, 9 Feb 2000 15:02:19 -0800
Oops.  Meant "... short either battery terminal to the CHASSIS ...".

> -----Original Message-----
> From:  Randall
> 
> IMO the big advantage of putting the cutoff on the chassis 
> side is that then
> you can short either battery terminal to the battery (one at 
> a time) without
> damage.  If the cutoff is on the hot side, then shorting the 
> hot battery
> terminal to the chassis will produce *sparks*.
>

<Prev in Thread] Current Thread [Next in Thread>