shop-talk
[Top] [All Lists]

Re: Shipping an engine

To: ejrussell@sprynet.com, Peter Schauss x 2014 <ps4330@okc01.jccbi.gov>
Subject: Re: Shipping an engine
From: "R. John Lye" <rjl6n@virginia.edu>
Date: Thu, 03 Sep 1998 10:30:52
At 07:22 AM 9/2/98 -0700, ejrussell@sprynet.com wrote:
>If I were shipping an engine, I'd start with a pallet, securely attach the 
>engine and build a plywood box to cover it.

That's what I did when I shipped my tranny.  I made the box from
either 1/2" or 3/4" plywood (I can't remember right now) and added
some places to bolt the tranny rear mount.  I bolted the bellhousing
to one side of the box.

John Lye
rjl6n@Virginia.edu

<Prev in Thread] Current Thread [Next in Thread>