>
>
> -> - air tools - what size compressor is needed to run drills/grinders
> -> without having to wait for the compressor all the time.
Min 14 CFM More if you want to run a blast cabinet these need 20CFM
>
> Compressors are a whole subject of their own, as the manufacturers'
> specs tend to range from misdirection to outright prevarication. In
> general, get the one that makes the most CFM at 90PSI or better. Put
> the compressor *outside* your work area - you could, for example, put it
> in a garden shed and run an underground pipe to the garage. Otherwise
> it will drive you nuts with the noise.
Underground pipes are bad news. The create a low point which will collect
moisture you cannot drain. The moisture will collect doubly because of the
temperature change. Bad idea.
May beneficent spirits oversee your endeavours,
JH
>
|