At 11:14 PM 3/5/96 -0500, you wrote:
>I have a Delta full height drill press,I would not buy one again,
>the chuck is pressed on and falls off at the slightest side loading of the
>bit, the lack of stiffness in the shaft compromises accuracy of the unit,
> the depth stop is not strong enough to stop the unit, other than that it's
>perfect.......;
>want to buy one slightly used.......................Chuck
I've got one too! I wouldn't recommend it either... the spindle runs so far
out of round that sometimes it seems like the machine wants to walk away...
want to buy one slightly used?
-Brad
|