Was missing a few - bought set of 8 on eBay - about $25 used - are metal
stampings - fit on plug caps with tension / interference fit - fit old & new
set of wires fine.
Jim
----- Original Message -----
From: "Tom Cooper" <cooptnt@att.net>
To: "'james hays'" <thomasind@nventure.com>; "'Oletrucks'"
<oletrucks@autox.team.net>
Sent: Tuesday, November 18, 2008 7:30 PM
Subject: RE: [oletrucks] heat on wire boot
How do they in stall? What do they bolt to? Do you have a pict?
Thanks
Tom
-----Original Message-----
From: owner-oletrucks@Autox.Team.Net [mailto:owner-oletrucks@Autox.Team.Net]
On Behalf Of james hays
Sent: Tuesday, November 18, 2008 9:18 PM
To: Tom Cooper; Oletrucks
Subject: Re: [oletrucks] heat on wire boot
For what it's worth I have a 350 ( LT-1 ) that has factory formed metal
shields over the plug caps!
Jim
55 1st pu
----- Original Message -----
From: "Tom Cooper" <cooptnt@att.net>
To: "Oletrucks" <oletrucks@autox.team.net>
Sent: Tuesday, November 18, 2008 4:03 PM
Subject: [oletrucks] heat on wire boot
>I have a 1974 350 in my truck and although I haven't let it run longer than
> 20 or 30 minutes, I believe I may end up with a heat problem from the
> headers. My plugs are underneath some of the header pipes and may create a
> melting of the wire boot when I let it run up to full speed, when ever
> that
> may be. Anyway, is there a long plug and a short plug for the 350? Is
> there a plug wire boot that will not burn and melt?
>
> Thanks for the advice
>
> Tom in SC
>
> 1955 2nd
|