If you buy a tool buy something that will fit your socket set - can't get
enough pressure for old bolts with a screwdriver - I cut off a screwdriver -
weld to a old socket ( then found out they make them ).
Jim
----- Original Message -----
From: "Bill Bailey" <bill@oletruck.com>
To: "Captain Kirk" <thecaptainkirk@yahoo.com>
Cc: "oletrucks" <oletrucks@autox.team.net>
Sent: Thursday, May 08, 2008 6:31 AM
Subject: Re: [oletrucks] special tool
> Captain Kirk wrote:
>> Hey Guys,
>>
>> I'm trying to remove the access panel in the floor of the cab to gain
>> access
>> to the top of the transmission.
>>
>> There's some special screws that I can NOT find a screwdriver for.
>
> They are called Clutch Head Screwdrivers and they are available from
> several of the usual vendors plus you can probably find them at a *real*
> auto parts store. Snap On had them too but as I recall they were pretty
> $$$. I have also taken el cheapo phillips head screwdrivers and ground off
> the opposite points and made them work on those screws. I always replaced
> the screws with standard hardware because they can be the devil to get out
> and I am not concerned with originality.
>
>
> --
> ======================
> Bill Bailey
> bill@oletruck.com
> http://www.oletruck.com
|