Kent S. Butler wrote:
> I need help removing the master cylinder on my "56 Chevy 3100. It is mounted
>on the frame rail underneath the floor board on the driver's side. For the
>life of me, I don't know how to disconnect it from the brake pedal. For my
>sanity, any and all help would be greatly appreciated.
>
> Thanks in advance,
>
> Kent Butler
> '56 Chevy 3100
> Houston, TX
Hi Kent
It's been a number of years since I had the stock setup on my 57 but as
I recall the brake pedal goes through the floorboard to a pivot off the
frame and then bends back almost straight towards the master cylinder.
There is a rod coming from the front of the master cylinder with a
clevis type arrangement that connects the master cylinder rod to the
brake pedal assembly with a drop through pin.
I hope my memory is serving me correctly, if not I'm sure someone will
correct me.
--
===========================
Bill Bailey
www.oletruck.com
bill@oletruck.com
--
Version: 7.5.467 / Virus Database: 269.6.2/785 - Release Date: 5/2/2007 2:16 PM
|