oletrucks
[Top] [All Lists]

Re: [oletrucks] Re-upholstery kit questions

To: "The Botelers" <boteler@olg.com>, <oletrucks@autox.team.net>
Subject: Re: [oletrucks] Re-upholstery kit questions
From: "Kinderlehrer" <Kinderlehrer@comcast.net>
Date: Mon, 5 Feb 2007 19:42:51 -0800
Mike, thanks for the info. I plan on checking out a few uphostery shops but 
I suspect that in this area (San Francisco Bay) the prices will be a tad 
higher.

Bob

----- Original Message ----- 
From: "The Botelers" <boteler@olg.com>
To: "Kinderlehrer" <Kinderlehrer@comcast.net>; <oletrucks@autox.team.net>
Sent: Monday, February 05, 2007 7:04 PM
Subject: Re: [oletrucks] Re-upholstery kit questions


> Bob,
>
> Both my Fire Truck and Tow Truck seats have been redone.  I had my local 
> upholstery shop take care of it for me (not a kit).  I sandblasted the 
> frame and springs, gave it a good coat of black paint and turned it over 
> to them to do there magic.  The cost was about $250 if I remember right. 
> The kits from the truck vendors is for only the seat cover, it doesn't 
> come with the Burlap, Cotton or Foam.  Still needing all of that and not 
> wanting to do it on my own, I opted to farm out the entire job.  I think I 
> saved money in the long run and I have great looking seats.
>
> Good luck!
>
> Mike Boteler
> '56 4400 Brush Fire Truck NAPCO
> '56 8400 Wrecker w/Holmes 525
> '56 9200 Tractor w/Allison Automatic
> '57 10500 Fire Truck
> Hughesville, MD
> http://www.chevytrucks.org/mikesgarage/
>
>
> ----- Original Message ----- 
> From: "Kinderlehrer" <Kinderlehrer@comcast.net>
> To: <oletrucks@autox.team.net>
> Sent: Monday, February 05, 2007 9:12 PM
> Subject: [oletrucks] Re-upholstery kit questions
>
>
>>I picked up a new seat, well, an old seat that is, for my 56 Stepside on 
>>Saturday.  It's supposedly from a '58 so should fit, but it needs to be 
>>re-uphostered.  I saw a kit that seems to be the same as the one Truck 
>>Shop sells for $112 and it seemed pretty chintzy.
>>
>> The Filling Station has one they describe as heavy duty and in the 
>> original patterns, bit no picture on their on-line catalog.
>>
>> Has anyone had any experience with either of these, or any other kits, 
>> that they would care to share? Any pictures of what it should look like 
>> when it's done?  I am trying to stay sorta original.
>>
>> Thanks,
>> Bob





<Prev in Thread] Current Thread [Next in Thread>