Hey guys, I'm installing the rear end mount kit that I got from No Limit and I
have some questions. It says to level the frame and set the pinion angle to
zero. Then when you let it down it will be set perfect. I have everything set
up like that and I have a magnetic degree wheel. Do I just set the degree
finder on the front right behind the u-joint yoke or is this wrong? The rear
end I have is out of 64 or 65 Chevy car with no cover on rear of it.
Everything bolts in from the front. Anyway there is a flat spot to set the
degree finder directly in back of the yoke. If I am wrong please let me know
because I would like to get these spring perches welded on and get this thing
rolling again.(Not running-just rolling) THANKS,
Don Simmons
1953 3100
[demime 1.01d removed an attachment of type image/gif which had a name of
Emoticon1.gif]
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|