In a message dated 3/26/2005 6:39:01 PM Central Standard Time,
pkupman57@hotmail.com writes:
Now, my question, whats the easiest/fastest way of removing the rivits that
are used on the chassis?
Get out the grinder, and have at it!!! If you are real good and real
careful, a cutting torch can be used to cut off most of the head of the rivet,
but
you will still have to use the grinder on the rest of it. When you get most
of the head the rivet ground off, then use a punch and hammer, and knock it out
of the frame. Take your time, and get a firm grip on the grinder, and you'll
do a fine job, without "messing up" the frame. Good Luck.
Pat Hollister
(truckless)
West Burlington,
IA.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|