Great Article Al
This has to be the best writing I have seen on this subject. I hope everyone
updating their electrical system got to see and save this. The system I use
most is very plainly shown on the Model"A", this method is very simple to
hook up if you use an ign switch with assessory side. you hook the field
wire to the assessory post eliminating the use of a diode on this circuit.
Lee
Another "54
----- Original Message -----
From: "Alan Horvath" <alan@alanhorvath.com>
To: <oletrucks@Autox.Team.Net>
Sent: Wednesday, December 29, 2004 4:36 PM
Subject: Re: [oletrucks] Questions
> John Carroll wrote:
>
> > I changed to a single wire alternator to get rid of the voltage
> > regulator.
>
> That's the kind of alt. used on a tractor, John ... not the best setup,
> especially for a 350sbc. You can read about the differences at this
> GREAT web site - here's the info about 1-wire vs 3-wire:
> http://tinyurl.com/3kwse
>
> Alan
> http://AlanHorvath.com/54chevy/
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|