[oletrucks] mastercylinder

["K. M. Lehmann" <klehmann@bentonrea.com>]

Wayne
I can see from the photo that the pivot pin for the pedal is drilled too low
for your pedal.This hole must be drilled the same distance above the center
line of the M/C as the distance between the two pivot holes on the pedal.
Lee

[demime 0.99d.1 removed an attachment of type image/jpeg which had a name of 
mastercylinder.jpg]

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959