Manny,
For all your 12v items, gas gauge, heater blower will have to have a
voltage reducing resistor to drop the 12 down to 6 so you can use your
original components. Here's a link on
http://www.inliners.org/tech/12v.html discussing the entire changeover.
Good luck, he references getting his voltage reducers from Jim Carters but
most all vendors carry these since its such a popular mod. --wayne
At 08:25 AM 8/1/04 -0400, Manny Marcano wrote:
>I just got my 53 converted but I don't know what to do with the gas gauge.
>
>I left it disconnected assuming the 12V would kill it.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|