Tom the rear your looking for can be recognized with the wide leaf springs
and one shock mount going forward and one aft, most good ones had a larger
pinion shaft and yoke than the standard Chev 10 bolt. The backing plate is
square and attached with 4 bolts and nuts. The later , after81, looked
similar but was much lighter duty, had metric wheel studs. I put springs and
all in my '54 from a '59 Z28, works nice.
Good Luck
Lee
----- Original Message -----
From: "Tom C." <c_tom@bellsouth.net>
To: "Oletrucks" <oletrucks@autox.team.net>
Sent: Thursday, November 06, 2003 4:05 PM
Subject: [oletrucks] going Saturday
> Well I found a junk yard about 60 miles from me that says they should have
a
> 1970-1981 Camaro rear end for my 55 2nd. They want $150.00 and they will
> take it out. If they by chance have one out already, is there a way I can
> tell if it is really from the correct year Camaro that I need? I don't
want
> to come home with another rear end I can't use. Any markings or specific
> measurments?
> Thanks Tom in SC
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|