I have had to soak the spine with marvel oil then put enough pressure on the
bolt you turn and not bend it, then wack the bolt you turn with a 1.5
ballpen hammer and if that doesn't work get a bigger hammer??
Hoot58
----- Original Message -----
From: "Wayne Osborne" <wayne@chevytrucks.org>
To: <oletrucks@autox.team.net>
Sent: Sunday, November 02, 2003 10:59 PM
Subject: [oletrucks] steering wheel removal
> Any helpful suggestions on getting a steering wheel off the shaft that
> seems to be severly stuck would be appreciated. Not mine just tryin' to
> help someone. He states he has used a puller and it has bent the bolt that
> you turn and the wheel hasn't move. Don't know if he has soaked it with
> wd40 for a few days, but any suggestions will help.. --wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|