oletrucks
[Top] [All Lists]

RE: [oletrucks] Old Panel Truck W/ 110 volt AC installed under

To: <Tezzme2@aol.com>, <oletrucks@autox.team.net>
Subject: RE: [oletrucks] Old Panel Truck W/ 110 volt AC installed under
From: "Hanlon, Bill (ISS Houston)" <bill.hanlon@hp.com>
Date: Mon, 13 Oct 2003 12:28:51 -0500
Two things to worry about here.

1.      Assuming the A/C unit needed 10 Amps (at 115 volts), you would need 
almost 90 amps (at 13 volts) continuous and a 100% efficient inverter to 
provide the necessary power.

2.      How do you get airflow through the condenser coil on the back of the 
A/C unit?  If it is inside the cab the "net" cooling of the unit is less than 
none.  It would actually make the cab warmer.  You would have to somehow 
provide a fairly substantial outside air flow for the rear of the unit.

-----Original Message-----
From: Tezzme2@aol.com [mailto:Tezzme2@aol.com]
Sent: Monday, October 13, 2003 10:52 AM
To: oletrucks@autox.team.net
Subject: [oletrucks] Old Panel Truck W/ 110 volt AC installed under the
Dash ?


Hi , over the weekend at a carshow i seen a old panel truck with a very small 
110 volt ac mounted below the dash in the center.It was trim out nice with a 
custom face plate.He was showing it off but not giving details except that it 
was 110 volt & worked really well.Would a small AC run off of a inverter with a 
second battery and a larger alternator??? or is someother way it was done?


                               Steve Rushing
                              Ocala Florida
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>