Does anyone know what the modern tire size equivalent would be for the original
6.50 x 16 tires that came on the '53 Chevy AD trucks? Assuming a radial, I
want a tire with the same diameter and approximately the same width. i.e.
P205R70 -16 or LT20575-16 or ????
Thanks.
***********************************************************************
Jim Wilkerson
***********************************************************************
-----Original Message-----
From: PeeWee [mailto:PWeee@earthlink.net]
Sent: Monday, September 22, 2003 12:02 PM
To: oletrucks@autox.team.net
Subject: Re: [oletrucks] RE: oletrucks-digest V2 #2060
Nope, it's not a 347.
Pee-Wee.
PeeWee wrote:
> Maybe a 347 instead of 348? 1957 GMC's had the 347 V8 motors. Pee-Wee.
>
> Blaine & Maggie Dumkee wrote:
>
>> Well I can't answer all your questions but I will start with a
>> couple.
>>
>> Is the truck indeed a Chevrolet or is it a GMC? If a Chevy then the
>> 348 is
>> not the original engine.
>>
>> 6 cylinder trucks still had floor starters in 1958, but not V8's,
>> this may
>> be another clue that it is not the original engine. But maybe the
>> cabs all
>> had the hole!
>>
>> But because it is not a 1/2 ton this may not be correct.
>>
>> As for your plans, go for it! I do not think this list is the place
>> that some one will tell you to sell the truck and go down to you
>> local dealer and buy a new one. Unless of course they want to buy
>> your truck!
>>
>> Best of luck with your truck and keep us informed.
>>
>> Blaine Dumkee
>> Fort Smith NT
>> Canada
>> http://photos.yahoo.com/bdumkee
>>
>> -----Original Message-----
>> From: owner-oletrucks@autox.team.net
>> [mailto:owner-oletrucks@autox.team.net]On Behalf Of Cecil "Steve"
>> Martin
>> Sent: Saturday, September 20, 2003 5:37 AM
>> To: oletrucks@autox.team.net
>> Subject: [oletrucks] RE: oletrucks-digest V2 #2060
>>
>>
>> Hi guys,
>>
>> I just took my 58 Apache 1 ton out for a drive last night. I
>> haven't had it long. I don't know much history on the truck, but I am
>> curious as to some of the things I found about it. Maybe some of you
>> more knowledgeable guys can let me know the story on some of the
>> things about the
>> truck.
>>
>> It has a 348 engine that I am not sure if it's original or not.
>> Someone said
>> it probably wasn't because of how close the steering shaft came to the
>> exhaust manifold. It does have dual rear wheels, and the side emblem
>> says
>> 3200.
>>
>> It has a hole in the floor where the foot starter may have been? Did
>> the 58's still use those? It now has a starter switch on the dash.
>>
>> Other than a SMALL area on the back of the cab, this baby seems
>> pretty close
>> to rust free. It's also in great shape with little to no major body work
>> needed.
>>
>> The tranny is a 4 speed with a granny first. I can't get above about
>> 5mph
>> before I need to shift. Top speed seems to be about 50 mph.
>>
>> The distributor is still points. If I decide on keeping the 348 in
>> there for
>> a while I'd like to convert it to HEI, but not sure they make a
>> distributor
>> for it. I understand they are unique?
>>
>> Long range plans are to make it a reliable long distance car trailer
>> tow vehicle, and maybe more. Maybe a camper? Of course it will be
>> great for going down to the home improvement store and towing the
>> boat to the lake, and eventually car/truck shows.
>>
>> Thinking about a 383 stroker for torque, a 4L80E automatic, front
>> disk brakes, adding power steering, and power brakes, Dually rear our
>> of a junked modern truck? Flaming River tilt column, and a nice
>> modern bench seat among
>> other interior decorations.
>>
>> Some of you might be saying "why don't you just buy a new truck?"
>> Well I
>> think the 2003 Chevy trucks are the ugliest danged things ever made
>> for one,
>> I love the looks on these older classics, and besides....it's kinda
>> fun to
>> build it like I want one to be rather than check options on a paper
>> at the
>> dealer. Besides, you get out of some legal hassles with smog
>> requirements,
>> you can put together combinations not available at a dealer,
>> insurance in
>> cheaper, and the value goes up in time, not down.
>>
>> Anyone have any tips or observations?
>>
>> Steve
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and
>> 1959 oletrucks is devoted to Chevy and GM trucks built between 1941
>> and 1959
>>
>>
>>
>
--
1958 GMC 336 V-8 Factory Napco Suburban Carryall
1959 GMC 270 inline 6-cyl Suburban Carryall
1955 to 1959 GMC website: http://members.tripod.com/P-Wee Become a Member,
Restore a Napco! http://www.napco4x4.org oletrucks is devoted to Chevy and GM
trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|