Recovered my seats with a cover I ordered from Jim Carter...The back of the
seat went fine, but when I did the bottom and finished, I was confused. The
inside of the seat cover was marked with an F which I assumed meant front of
seat...So I placed that part toward the front, but when I finished I was not
really happy with the flap (meaning there is not one continuous piece across
the front, there is a flap that folds down) being in the front...but didn't
see how the cover could have gone on the opposite way...
There could be 2 things wrong...
1. I put the seat cover on backwards...
or 2. I put the entire seat in backwards in the truck...
If anyone has installed this cover, can you please help.
I assumed that the flatter part of the seat went underneath the back of the
seat. because there are two, "stops" I will call them that push up against
the front bar of the seat platform.. can't say I recall which way it was
before i took it out of the truck....But I am distinctively remember someone
giving me a beginner tip...ALWAYS take pictures or notes as to how things
come apart so you can put them back...hmmm lesson learned.
Karen Duff
53 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|