You probably just need to adjust the choke so it doesn't close so
much "opens up quicker" and has a higher rpm when the choke is on to
aid in faster engine warm ups.
If it's running fine after it warms up theirs probably nothing wrong
with the float setting but a quick dunk in some carburetor cleaner and
a new gasket set, float drop and float level check and a new fuel
filter never hurts.
Joe
----- Original Message -----
From: tim <lloydt@Colorado.EDU>
Date: Tuesday, July 15, 2003 7:36 pm
Subject: Re: [oletrucks] one cylinder at a time?
> Both black and white smoke. Okay, so it's flooded, then? What
> next,
> adjust the carb so it doesn't flood?
>
> Thanks,
>
> On Tuesday, July 15, 2003, at 04:54 pm, JOE GARCIA wrote:
>
> > Do you see any black smoke out the tailpipe? Kind of sounds
> like it's
> > flooded.
> >
> > Joe
> >
> >
> >
> > ----- Original Message -----
> > From: tim <lloydt@Colorado.EDU>
> > Date: Tuesday, July 15, 2003 2:36 pm
> > Subject: [oletrucks] one cylinder at a time?
> >
> >> Well, my truck's been running great for the past 2 weeks since
> >> getting
> >> her back on the road with a rebuilt fuel system and new, hotter,
> >> spark
> >> plugs. Then on Saturday, Monday, and today, she's been really
> >> rough
> >> starting up. It seems like she just starts on one or two
> >> cylinders,
> >> after lots of cranking of the starter, then I can hear each of the
> >> other cylinders come on after a few seconds. After warming up for
> >> a
> >> few minutes, though, she runs smoother than she's ever run before.
> >>
> >> What could this be? What should I check?
>
> Tim Lloyd, lloydt@colorado.edu
> 1954 Chevy 3100 Pickup "Peanut"
> 1954 Chevy 3100 Panel "Being paid for"
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|