oletrucks
[Top] [All Lists]

Re: [oletrucks] HEI

To: Ole Truckers <oletrucks@autox.team.net>
Subject: Re: [oletrucks] HEI
From: tim <lloydt@Colorado.EDU>
Date: Mon, 23 Jun 2003 14:15:56 -0600
Who sells Pertronics?

On Monday, June 23, 2003, at 02:11  pm, Bob KNOTTS wrote:

> I think I paid abt $70 for my pertronics. Bob K
>
> ----- Original Message -----
> From: "Williams Grant Civ Det 2 412TH AMXS/MXA2A"
> <Grant.Williams@kirtland.af.mil>
> To: <Tom3600@webtv.net>; <lloydt@Colorado.EDU>
> Cc: <oletrucks@autox.team.net>
> Sent: Monday, June 23, 2003 12:24 PM
> Subject: RE: [oletrucks] HEI
>
>
>> The HEI is great but the one I got from Tom is kinda tall. Despite the
> coil
>> being mounted away from the cap, the distributor cap stands nearly as 
>> tall
>> as the lower portion of the valve cover. It's also a little pricey at
> $180.
>> The good news is, it still has the original appearance.  Also, the 
>> coil
> can
>> easily be replaced on the road if you carry an extras under the seat.
>>
>> I know Jegs and Summit carry a conversion for your stock distributor. 
>>  The
>> cost is $90 and all you need to add is the external HEI coil.
>>
>> Grant
>>
>> -----Original Message-----
>> From: Tom3600@webtv.net [mailto:Tom3600@webtv.net]
>> Sent: Monday, June 23, 2003 12:42 PM
>> To: lloydt@Colorado.EDU
>> Cc: oletrucks@autox.team.net
>> Subject: Re: [oletrucks] HEI
>>
>>
>> Tim ~
>>
>> I agree with everything Bill said about HEI.  I got mine from Jim 
>> Carter
>> but if I were to do it over I would get the smaller version fron Tom
>> Langdon at www.stoveboltengineco.com   You can see mine at:
>> http://community.webtv.net/TOMPOT/TOMS1949CHEVYPICKUP
>>
>> Tom
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 
>> 1959
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 
>> 1959
>>
>>
>
>
Tim Lloyd, lloydt@colorado.edu
1954 Chevy 3100 Pickup "Peanut"
1954 Chevy 3100 Panel "Being paid for"
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>