Use some fairly soft rubber bumpers to twist the gate a little when
that side is loosened. Most OEM gates are warped enough that one
side will pop loose first all by itself before the other is released.
Bruce K
57 3200
Mt. Iron, MN
At Tuesday, 03 June 2003, you wrote:
>Seems it would be hard to open, having to it seems almost push both
buttons
>at the same time.
>
>Bill
>
>At 06:37 PM 6/3/2003 -0500, Carl & Becky Ham wrote:
>>Don:
>>Thanks for replying. Without some photos it is hard to visualize
what these
>>latches would look like. Can you tell me where on the tailgate
where the
>>chrome belt ends bolted? Did the owner bend them 90 degrees ("L"
shape) and
>>bolt them to the inside surface of the tailgate? Or was there enough
>>clearance to bolt them to the sides of the tailgate? Appreciate
your help.
>>Thanks,
>>
>>Carl Ham
>>'56 Chevy TF Stepside
>>Pontiac, IL
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
===================================================================
EASY and FREE access to your email anywhere: http://Mailreader.com/
===================================================================
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|