I have been following this thread. I have the opposite problem to correct.
My 55 half ton was converted to a one wire alt by the PO. I am returning
this one to stock. The PO bundled up the original wires and slid them behind
a hood hinge. Can anyone with a generator ping me and tell me what color
wires go where? Thanks
LarryW
55 1/2 ton "Almost stock"
56 1/2 ton "HotRod project"
----- Original Message -----
From: "Devin Timmons" <64bowtie@quik.com>
To: "oletrucks list" <oletrucks@autox.team.net>
Sent: Wednesday, April 16, 2003 9:44 PM
Subject: [oletrucks] gen to alt wiring
> ok, I've done some searching, and all I've come up with is info for
changing
> to a 1 wire alternator. The one I have is the old style, 3 wires out of
the
> same '66 pickup that the 327 came out of. I'm assuming the big wire on
top
> has to go to the battery, but the 2 smaller ones with a plug in I'm not
sure
> of. Any suggestions would be appreciated.
>
> Devin
>
> '57 3100
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|