Steve
I am not sure if CPP manual and power kits are identical . I
installed a manual kit in a 58 w/no problem. The kit with the power
booster I put in a 55 and I had the sticky pedal problem. The pedal
extension is a metal piece with a large hole @ the top ( for the pedal
pin ) and 2 smaller holes @ the bottom . One hole is for the master
push rod and the other hole bolts to the pedal. It connects the pedal to the
m/c push rod. If your kit does not use this extension and the m/cylinder
push rod connects directly to the pedal, I would still disconnnect the M/C
push rod and check the pedal action. Make sure the pedal moves freely and is
not binding in the CPP bracket. I hope this is of some assistance
dan G
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|