Thanks to everyone who responded to my 700R post. I think it is an 89
also. What still has me puzzled is the strange looking counter weight
attached to the aft end of the housing? There are to L like brackets
attached on either side of the tail shaft spines (were the drive shaft
attaches). These brackets extend below the Trans. Then attached to the
bottom of the brackets are what appears to be a series of round wafers
about 6 or 7 inches in circumference and bolted together. Has any one
seen this before?
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net] On Behalf Of 53ChevyTruck
Sent: Saturday, March 22, 2003 10:49 AM
To: George Perez
Cc: oletrucks@autox.team.net
Subject: Re: [oletrucks] 700 R
I'm pretty sure the first number you have there is the last digit of the
year (9 for 1989).
> Does anyone know were or how I can check a Serial Number for a 700R
> Trans? I was told it came out of an 89 Camaro but I'm not sure. It has
a
> strange looking counter weight attached to the aft end of the housing.
> The serial number is 9Y6167N.
>
> Thanks
> George
>
> 55 TF
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|