Hey,
Appreciate it! You sent me 2 photos a while back, I still have them and
your email .. one was of your latch in the cab and the striker in the door.
If you have anymore or more of your truck I'd love to see them.
I dropped the parts off today at the shop, unfortunately I don;t have the
time nor talent to do the major bodywork and fabrication right now, so I
must pay through the teeth for it! :-) Luckily, a new guy is running the
shop (same owner though) and he told me things have changed, he will only
do what I want done (they have done extra unwanted work in the past) and he
will let me know up front about what it will cost.
Thanks!
Bill
http://www.vanhalen-irc.com/pro55
At 01:57 PM 3/4/2003 -0500, Old Chevy Pickup wrote:
>Bill,
>
>I just did the exact thing you are about to do. It was one of the most
>satisfying things I have done to my truck. What you do is install the
>latch in the body with the installation kit you bought. Then put the
>plate that came with the kit on the door. Cutting out the old sheetmetal
>in the door and welding in the flat plate. Then close the latch and shut
>the door.
>Then from inside the cab, place a pencil through the closed latch and draw
>a circle on the door. Then open the door and you will see the mark that
>you just made. Center punch the mark and drill a half inch hole or
>5/8. When you put the sticker bolt in the little adjustment you have from
>the hole being oversized will give you all the adjustment you need. Let
>me know if you want me to send some pictures to you and I can.
>
>Enjoy!
>
>Dan Jacobsen - PA
>'49 3100 327/powerglide
>'55.1 3100 rodstoration 350/350 MII (in Progress)
>'55.1 3600 Original
>'51 6400 Deluxe Cab on '87 chassis
>'35 Dodge Business Coupe - All original
>
>
>
>
>
>>From: Bill Broadway <bcubed@vanhalen-irc.com>
>>Reply-To: Bill Broadway <bcubed@vanhalen-irc.com>
>>To: oletrucks@autox.team.net
>>Subject: [oletrucks] Bear Claw Latches
>>Date: Tue, 04 Mar 2003 10:15:35 -0600
>>
>>I just got my Bear Claw latches and Install plates in and can't wait to get
>>them in the truck. I figured ordering the plates would simplify the install
>>and make things look much cleaner. I ended up going with Julianos and was
>>very happy with the price, packaging (so many places just throw parts in a
>>box, these were very professional) and the time it took to get them.
>>
>>My question is, when installing the striker pin, which will be in the door
>>as I am going the route of putting the latches in the cab and pin in the
>>door for shaved handles. Should it be done with some sort of captive nut or
>>some other method for adjustability? Seems like on stock cars if you
>>loosened the striker pin you could make some minor adjustments and then re
>>tighten it.
>>
>>Oddly enough, I just checked some of my old mail and I had originally
>>looked at buying my latches from Autoloc and they had a floating striker
>>pin mount, too bad they don't sell it separately.
>>http://www.autoloc.com/detail.lasso?itemid=BCINST-L
>>
>>Thanks,
>>Bill
>>http://www.vanhalen-irc.com/pro55
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>
>_________________________________________________________________
>Add photos to your e-mail with MSN 8. Get 2 months FREE*.
>http://join.msn.com/?page=features/featuredemail
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|