Thanks Billy WE got it now.
George
55 2nd series
Billy Gibson wrote:
> Sorry I was about half asleep.
> Put your hinges on the firewall first,.have two people
> and a broom stick,
> put the broom stick under the front of the hood to hold it up.
> then each person grab a side have your bolts ready,
> use your arm and your neck holding the hood the broom stick
> holdin the front, then you have a free hand to screw your bolts in.
> Hope this helps
> Hoot58
> ----- Original Message -----
> From: "George Perez" <gp670@visi.net>
> To: "Billy Gibson" <bgibson@internetwork.net>
> Cc: "Gordon V. Wilhelm" <gvwilhelm@shaw.ca>; <oletrucks@autox.team.net>
> Sent: Thursday, June 27, 2002 5:15 AM
> Subject: Re: [oletrucks] Putting the hood back on a 1951 GMC
>
> > Common Billy , Put the hinges on what first ? Gordon and I need a Little
> more
> > Info.
> > I'm sure lots of other list members might like to hear about it also.
> > Billy Gibson wrote:
> >
> >
> > Thanks
> > George
> >
> > 1955 2nd series
> >
> >
> >
> >
> >
> > > Put the hinges on first
> > > Hoot58
> > >
> > > ----- Original Message -----
> > > From: "Gordon V. Wilhelm" <gvwilhelm@shaw.ca>
> > > To: <oletrucks@autox.team.net>
> > > Sent: Wednesday, June 26, 2002 3:33 PM
> > > Subject: [oletrucks] Putting the hood back on a 1951 GMC
> > >
> > > > Hi all,
> > > >
> > > > I am at the point where I can put the hood back on. I was wondering
> > > whether it would be easier to bolt the hinges to the hood first and then
> > > fasten the hinges to the cowl or the other way around??
> > > >
> > > > Any tips on the problems that I will be facing??
> > > >
> > > > Thanks in advance for your help.
> > > >
> > > > Gordon Wilhelm
> > > > 1951 GMC 5 window 1/2 ton
> > > > oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
> > > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|