I don't know yet and if all goes as planned, I may never know. I plan to
jack mine up off the frame and put some 2x6's underneath. Then roll the
chassis out from under the cab. Hope to then jack it down onto my dolly.
-----Original Message-----
From: Bob KNOTTS <raknotts@qwest.net>
To: Bill Broadway <bcubed@vanhalen-irc.com>; 'kirk pierce'
<kpierce@charter.net>
Cc: 'OleTrucks mailing List' <oletrucks@autox.team.net>
Date: Saturday, May 25, 2002 3:33 PM
Subject: Re: [oletrucks] Cab Dollie - Help
>Roughly how much does a bare cab weigh? Thanks, Bob Knotts in PHX,AZ
>
>----- Original Message -----
>From: "Bill Broadway" <bcubed@vanhalen-irc.com>
>To: "'kirk pierce'" <kpierce@charter.net>
>Cc: "'OleTrucks mailing List'" <oletrucks@autox.team.net>
>Sent: Saturday, May 25, 2002 9:48 AM
>Subject: RE: [oletrucks] Cab Dollie - Help
>
>
>> Yes sir, there is ... it's at http://vanhalen-irc.com/pro55/dollie/ And
>> just to clarify, I just put the plans up for all to see, I didn't design
>> them.
>>
>> The dollie has been invaluable, but after building it the one thing I
>> would suggest is that you use casters with locks on the wheels or make
>> some sort of brake. When working on the cab it can have a tendency to
>> roll around.
>>
>> Bill
>>
>> > -----Original Message-----
>> > From: kirk pierce [mailto:kpierce@charter.net]
>> > Sent: Saturday, May 25, 2002 11:37 AM
>> > To: Bill Broadway
>> > Cc: OleTrucks mailing List
>> > Subject: Re: [oletrucks] Cab Dollie - Help
>> >
>> > Bill,
>> >
>> > I have found the link to your plans for a dollie for 55-59 cab. I am
>> > about
>> > to remove my cab from 57 1/2 ton and wanted to see your dollie. Is
>> there
>> > an
>> > updated link?
>> >
>> > Kirk Pierce
>> > 1957 1/2 ton
>> > '57 283
>> > -----Original Message-----
>> > From: Bill Broadway <bcubed@vanhalen-irc.com>
>> > To: George Long <longgw@fast.net>; oletrucks@autox.team.net
>> > <oletrucks@autox.team.net>
>> > Date: Saturday, July 14, 2001 10:57 AM
>> > Subject: RE: [oletrucks] Cab Dollie - Help
>> >
>> >
>> > >> If anyone can help my son and I would appreciate it. We have
>> tried
>> > >> to pull the dolly plans off the web but can not get to them. Does
>> > >> anyone have them saved that they can be emailed? The address is
>> > >> longgw@fast.net. We will appreciate the plans and any helpful
>> ideas
>> > >> you can send.
>> > >
>> > >http://www.vanhalen-irc.com/bill/55truck/dollie/
>> > >oletrucks is devoted to Chevy and GM trucks built between 1941 and
>> 1959
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|