I got a 350 from a '74 Impala - the stock exhaust went straight back. It
might be worth a look.
Randy
----- Original Message -----
From: "Peters, Jon C" <jpeters@sikorsky.com>
To: "'Gordon V. Wilhelm'" <gvwilhelm@shaw.ca>; <oletrucks@autox.team.net>
Sent: Tuesday, April 23, 2002 10:11 AM
Subject: RE: [oletrucks] Which headers will fit?
> I just pulled apart an 85 Monte Carlo with a stock v8. The drivers side
> manifold was >'s back straight down exit, and would appear to clear the
> moved over stock steering.
>
> Wouldn't the "Ram horns" mid 60 vette cast iron center dump manifolds
work?
> Jon P
>
> -----Original Message-----
> From: Gordon V. Wilhelm [mailto:gvwilhelm@shaw.ca]
> Sent: Monday, April 22, 2002 7:43 PM
> To: oletrucks@autox.team.net
> Subject: [oletrucks] Which headers will fit?
>
> Thanks to all who have passed on information about Sanderson
> and Heddman headers which look like they will fit. Before I go this route
> however I thought that I would ask some of you veteran rodders out there
who
> might know if there are stock exhaust manifolds out there for the SBC that
> are tight to the heads and which exit out to the rear??
>
> I have a '51 GMC with the stock steering box moved over
> about an inch and a half. This gives me about 2 1/2 inches between the
> heads and the steering box.
>
> I like to scrounge at the junk yard but it would be great to
> get a headstart on what models or years to look for.
>
> Thanks for your help.
>
> Gordon Wilhelm
> 1951 GMC 1/2 ton
> oletrucks is devoted to Chevy and GM trucks built between
> 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|