Don't you know you're supposed to keep you're hands on the
outside of the wheel when you're driving these babies off
road?? I learned the hardway too, I think I broke my thumb,
sore for a week..
but back to the original thread. radials are better tires
cuz they have more surface area contact with the road.
This makes them extremely tuff to turn when stopped or moving
slow, like when your trying to park, when you use the
steering the most. hmm, funny how that works......
I would highly recommend the PS if "ma" wants to drive it!!
or stick with the old bias ply, they turn tuff too when
sitting, but not as bad as those radials.
Even so, I've heard that these old suspensions can be
stressed with these tires. make sure all your tie rod ends
and such are in good shape and well lubed.
good luck, let us know what you decide.
keep truckin
---- Original message ----
>Date: Tue, 19 Feb 2002 17:45:49 -0500
>From: john dorsey <jrdorsey@strato.net>
>Subject: Re: [oletrucks] HOW WIDE: FRONT TIRES WITH MANUAL
STEERING
>Cc: oletrucks@autox.team.net
>
>Jeff, I'm running 265/70R17s on my panel and it's a real
bear to steer
>when stopped. Once it's moving it's not bad. The thing to
think about
>also is where your wife is driving it, if you have a dirt
driveway or
>sandy roads it's a lot harder. One other thing is that road
shocks are
>transmitted to the steering wheel and can yank it out of
your hands if
>you hit a pothole just right. I hit a stump in my firetruck
one time at
>less than 5mph and my hand was numb for 30 min where one of
the wheel
>spokes caught it.
>
>It's up to you, but if I was going the engine change route I
think I
>would go with P/S. The main reason I have not is I'm keeping
the
>original engines, but I'm always looking for original P/S
systems for my
>Chevy 3800 (rare as hens teeth) and my GMC 640 (even
rarer!). Of course
>as long as I'm dreaming I'd like to find an original Allison
Automatic
>for my 640 also :-)
>
>Noyes wrote:
>>
>> It is time to put tires on my project truck. I want to
run radials on my
>> '50 3600 w/350/TH350 with a stock front end (MANUAL
steering).
>>
>> For the fronts, I'm looking at either 215/85-16, or 235/85-
16 with a
>> relatively smooth tread.
>>
>> Is anyone running 235s with manual steering? Can my
petite wife steer it?
>> How about with 215s?
>>
>> Is anyone running anything wider with manual steering?
>>
>> This truck has never run with me as the owner, and I have
no prior
>> experience.
>>
>> Thanks in advance.
>>
>> Jeff Noyes
>> oletrucks is devoted to Chevy and GM trucks built between
1941 and 1959
>
>--
>John Dorsey
>Wauchula FL
>http://www.strato.net/~jrdorsey
>'49 3800 Chevy Panel
>'52 640 GMC Firetruck
>oletrucks is devoted to Chevy and GM trucks built between
1941 and 1959
Brian J Luebke
Senior Electronics Design Engieer
Firmware Development
ZIBSoft, LLC
Suite 219
W24733 Park Road
P.O. Box 335
Trempealeau, WI 54661
ph: 608-534-5670
fx: 608-534-5671
cel: 507-429-6065
email luebkeb@zibsoft.com
www.zibsoft.com
==================================
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|