Bill,
I bought a gasket for my 58 GMC (NOT CHEVY) Spicer rear end from NAPA
dealer, that was a couple of years ago, but you might want to try
them. Did you by any chance try some of the old truck vendors? Also you
could buy some regular gasket material (not cork) from your FLAPS and make
your own with that. There is also a guy by the last name of Olson that
sells nothing but gaskets, I will have to look up his card if you want it.
Jim V.
1958 GMC Suburban Carrier Pickup (Cameo style) - V8 Hydramatic
http://www.angelfire.lycos.com/mi2/jrvvehicles
dcvjrv@covad.net
At 11:05 AM 1/22/02 Tuesday, Hanlon, Bill wrote:
>Anyone know where I can find a gasket for the differential cover on my
>57 GMC (NOT CHEVY) with the standard Spicer 45 rear end? The GM part #
>for the gasket is 2346829. It is no longer available from GMC and I
>have struck out at two FLAPS. I could always fall back to silicon goop
>or make my own from cork, but thought I'd check with the OleTruckers
>first.
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|