Alfie
Try loosening the nut, then hit the metal around the pitman arm
it should drop down with luck.
If you are talking about separating the pitman arm from the
steering box shaft you will most probably need a puller.
HooT58
----- Original Message -----
From: "A.B." <bigfred@unm.edu>
To: "old truck mailing list" <oletrucks@autox.team.net>
Sent: Tuesday, January 15, 2002 5:56 PM
Subject: [oletrucks] pitman arm installation
> Hi all,
> I'm having trouble putting my pitman arm back onto the stearing box. Is
> there some kind of tool for this, or do they usually not slide all the way
> down. I know they are a tapered fit, but this is pretty tough. Thanks.
> -alfie
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|