You could adapt the door flapper off say a mid 70 to 80's Chevy a/c truck as
they have a door that opens with vacuum.
Joe
-----Original Message-----
From: Jim Wilkerson <Jim.Wilkerson@sas.com>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Monday, January 07, 2002 2:28 PM
Subject: [oletrucks] Passenger Side Vent
>Hello!
>
>I am resto-rodding a 53 Chevy 1/2 ton and I am using a Vintage Air
AC/Heater unit. This leaves the original passenger side vent wide open
(since the stock Fresh Air Heater bolted over the rectangular hole and
controlled the air flow). I would like to put a door on the rectangular
vent in order to allow me to open or close it as I need. Does anyone have a
good solution for this? Is there an aftermarket vent door that will install
over the vent? Has anyone done this?
>
>Thanks.
>
>***********************************************************************
>Jim Wilkerson
>***********************************************************************
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|