No, you'll have to pull the window to put new ones in. First you need to
remove the wing window assy. there's a two? bolts down low on the
door..follow the rail down and you'll spot'em. I don't recall if there's
any up top in the frame, it's been several years since I pulled mine out.
With the window down, you'll be able to fanagle the vent window out. Once
the vent assy. is out of the way, and the inner panel off, you should be
able to get to the bolts holding the window onto the track.. I dunno, I
may have left a step or two out, like i say, it's been quite some time
since I did it..I do recall wishing I had a third arm when I put it all
back together;)
> [Original Message]
> From: Bill Bailey <billb1@mindspring.com>
> To: oletrucks <oletrucks@autox.team.net>
> Date: 1/2/02 7:29:07 PM
> Subject: [oletrucks] Question concerning TF windows
>
> Happy New Year everyone. I have a question regarding the little fuzzy
> anti-rattle strips that run horizontally along the bottom of the side
> windows in a TF truck. There is one on the outside and one on the
> inside. My question is, is there any way to put these in without
> removing the side glass? If not what is the best to go about removing
> the side glass?
> Thanks for any enlightenment anyone can give me.
> --
> Bill Bailey
> 1957 Chevrolet 3100
> Hagerstown, MD
> http://members.tripod.com/~oltruck
> billb1@mindspring.com
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
--- Mike
--- passnb4u@earthlink.net
--- EarthLink: The #1 provider of the Real Internet.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|