and if you get lucky you might find one with a 3.08 ratio.
-----Original Message-----
From: MKlepp4335@cs.com [mailto:MKlepp4335@cs.com]
Sent: Thursday, October 25, 2001 4:38 PM
To: HMills16@aol.com; oletrucks@autox.team.net
Subject: Re: [oletrucks] 6 lug later model rear end.
In a message dated 10/24/01 9:52:10 PM Central Daylight Time,
HMills16@aol.com writes:
<< What would be a 6 lug, exposed drive line rear end for a GMC/Chevy
1/2
ton. >>
I used a '62 Chevy truck rear. Same width and bolt pattern as original,
but
open drive. I had to cut off the original spring perches and weld on
new, no
sweat.
Mike Klepp
'48 3100
Wichita Falls, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|