Sorry it took so long to get back to say thanks for the diagram, that is
what I needed. According to your drawing, I have the wrong seat for my
truck. It will work until I can get the correct seat for it. Thanks again
for the diagram.
Friendly regards from the Carolina,
Tom
1997 -2000 Racing Seasons
http://home.earthlink.net/~tomntam/index.html
Don't crush em, restore em!!
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Claude
Sent: Saturday, July 21, 2001 9:15 PM
To: Oletrucks
Subject: Re: [oletrucks] seat measurements 55 2nd
I have this scanned from my 1959 restoration pac
http://www.dashlink.com/~rameyfam/pictures/cabmeas.jpg
----- Original Message -----
From: "Tom" <tomntam@earthlink.net>
To: "Oletrucks" <oletrucks@autox.team.net>
Sent: Saturday, July 21, 2001 5:33 PM
Subject: [oletrucks] seat measurements 55 2nd
> I posted this once before and got all the measurements I need except for
> one. If anyone has a 55 2nd TF with an original seat, I need the distance
> from the top of the seat cushion to the floor. The seat I have measures
> around 12 or 13 inches but it seems to sit a little low. Are there any
> spacers that go between the seat and the floor?
> Thanks for the help.
> Tom 55 2nd 3100
>
> 1997 -2000 Racing Seasons
> http://home.earthlink.net/~tomntam/index.html
> Don't crush em, restore em!!
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|
