While looking for information on GM wiring harnesses,
I ran across this at Painless Wiring's site. It shows
the different alternators GM has used and how to wire
them.
http://www.painlessperformance.com/manuals/90501m/90501Sec07.htm#90501%207.1
While it is not complete, it should answer your
question.
Jim Nordwall
1950 3100
Jacksonville, Illinois
--- "Gage L. Thompson / Schulz"
<Gagejohn@ix.netcom.com> wrote:
> Ok guys, I know this has been gone over in the past,
> but, I couldn't find
> enough info in the archives. So, here it goes:
>
> In hooking up a one wire alternator.....the post
> goes to the battery, but
> how should the ( - - )'s be hooked up? Some say
> hook 'em together...some
> say to the ignition....what's the correct plan?
>
> Thanks guys and gals!!
>
> John Schulz
> 59 TF 3100
> oletrucks is devoted to Chevy and GM trucks built
> between 1941 and 1959
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|