I got a set of Clutch-head driver bits at a Black and
Decker store close out for about $0.35 a piece, they
were just sitting there in one of the closeout bins.
This was a while back when there were getting ready to
merge with another company.
Antonio,
'53 3100
Quoting john j tonyes <flfox1@juno.com>:
> Pete:
>
> As a suggestion, don't buy the clutch head screw
drivers, from NAPA.
> They are too expensive. Someplace, I have a catalog
that has them in it.
> I priced them at NAPA, sometime ago and they wanted
as much for one as
> I could buy all four out of the cat. I had a
complete set back in the
> 50's, but someone needed them worse that I and so I
had to buy some new
> ones, Sears, said they don't have them any more.
That is where I bought
> my first set. Guess a lot of the old things are out
of production any
> more.
> John T.
> On Thu, 2 Aug 2001 7:40:49 -0700 "Mike "
<passnb4u@earthlink.net> writes:
> > Pete,
> >
> >
> >
> > I think I do recall them being clutchhead
bolts...the "slot" looks
> >
> > like a "figure 8" screwdriver slot? If so, they're
clutchhead.
> >
> > I was critical of originality, once I got the
bolts out, I filed
> > the
> > holes in the bedsides and the fender square and
used stepbolts to
> > reassemble.
> >
> >
> >
> > If I recall, NAPA, FLAPs, etc will carry a
clutchhead driver
> > set.
> >
> >
> >
> >
> >
> > ----- Original Message -----
> >
> >
> > From: Pete
> >
> > To: oletrucks@autox.team.net
> >
> > Sent: 8/1/01 7:48:11 PM
> >
> > Subject: [oletrucks] BOLT QUESTION
> >
> >
> >
> >
> >
> > I have finally started to tear down my 58 3100 step
side and don't
> > have
> > the
> >
> > right socket driver to take the rear fender bolts
off.
> >
> > Our Sears is remodeling and I can't find squat
there so if anyone
> > knows
> > the
> >
> > correct name for this rectangular socket headed
> >
> > bolt please let me know.
http://216.149.54.155/bolt_question.htm
> >
> > I believe it is called a "clutch head" but I'm not
sure
> >
> >
> >
> > Also I have started to chronicle the rebuild of two
different
> > vehicles
> > and
> >
> > have posted a few beginning pictures. Take a look
if you wish. This
> >
> > group
> >
> > has been an amazing wealth of info and I'm sure I
will be posting a
> > ton
> > of
> >
> > questions in the near future. So THANKS everyone.
> >
> > http://216.149.54.155/58index.htm
> >
> >
> >
> >
> >
> > Pete Hagan
> >
> > 58 3100 (off frame resto)
> >
> > 62 Falcon Futura (daddy's little red car)
> >
> > 62 Ranchero (parts runner)
> >
> >
> >
> >
> >
> >
> >
> > --- Mike
> >
> > --- passnb4u@earthlink.net
> > oletrucks is devoted to Chevy and GM trucks built
between 1941 and
> > 1959
> >
>
>
> 1927 Model T Roadster $*&#
> 1949 Ply & 1950 Chev PU to be restored
> 1952 5 window Chev PU (mine) restored
> 1954 Chev. PU (hers)
> Lakeland , Fl.
> oletrucks is devoted to Chevy and GM trucks built
between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|