Made it over to Chevy Duty in KC and measured a replacement floor pan for a
55-59 Chevy for the location of the lower inner fender mounting bracket. Made
a tracing and measured it when I got home. The top hole of the inner fender
mounting bracket is 6 and one-eights from the lower dimmer switch hole and 1
and one-half inches to the right. It is also 4 and 3-eights down from the
edge of the clutch pedal hole and 2 and 3-eights to the left. This should be
the same spot.The inner fender mounting holes are 1 and 3-eights apart and
are 3-eights holes. All measurements are from the center of the holes except
the clutch hole. Thanks for all the help guys. Keep up the good work Miq ! !
Jim H
57-3100-Step
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|