No, but, this T and a brake light switch to fit it should
be available in 3/8" at your FLAPS. Probably at less cost
than Ron Francis, especially after you add the two 3/8" to
1/4" adapters you are going to need (also at your FLAPS).
Remember that all brake connections MUST be double flare,
sometimes referred to as reverse flare.
-----Original Message-----
From: Andy Johns [mailto:andy51chevy@mindspring.com]
Sent: Monday, June 04, 2001 11:15 AM
To: oletrucks; Old Chevy Trucks
Subject: [oletrucks] Brake Lines
Hey all,
Due to finals and school I've been out of the list for a while. Sorry.
My question is about hydraulic brake switches. I need to put one in to my
break lines. There is one at Ron Francis that comes with the "T" adapter.
My question is, if my lines are 3/8 inch and the T is 1/4, will the size
change affect my brake performance? If so, how much? Thanks.
Andy Johns
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|