I have seen it in Pep Boys before but havn't had a
need for it in over 8 years, also try NAPA as they
usually have heavy duty paints and supplies. All I
remember is that stuff is awesome, sticks like mad
to sandblasted parts. I one time accidently got it
on a sanblasted bracket and I tried sandblasting it
off three months later and I had sit with the blaster
nozzle two inches away for like 5 minutes to remove it.
MAKE SURE you buy some POR-15 thinner as it is the only
thing next to MEK that will take it off, important
unless you enjoy having painted hands for two weeks.
Jeff Cerniglia
1959 GMC Fleetside
>From: "Old Chevy Pickup" <oldchevypickup@hotmail.com>
>Reply-To: "Old Chevy Pickup" <oldchevypickup@hotmail.com>
>To: oletrucks@autox.team.net
>Subject: [oletrucks] POR-15
>Date: Wed, 30 May 2001 10:10:15 -0400
>
>Does anyone know if POR-15 is available at any local auto parts stores
>etc.?
>I called my local speed shop and he never heard of it. I would like to
>pick
>up a quart today so I can weld in my "new" outer cowl piece. There is some
>surface rust that I would like to cover up before I close in the area. I
>just bought the 2 cowl panels from Chevy Duty (cheapest I found $89 each).
>They are the panels that go all the way up to the factory seem. Very nice
>quality.
>
>Thanks in ADvance!!
>
>Dan Jacobsen - PA
>
>'49 3100 327/Powerglide (hers)
>'51 3100 5-window (Sold)
>'55.1 3100 rodstoration (mine)
>
>_________________________________________________________________
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
_________________________________________________________________
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|