oletrucks
[Top] [All Lists]

Re: [oletrucks] Stop light wiring

To: <50chevy@iwon.com>, "OleTrucks List" <oletrucks@autox.team.net>
Subject: Re: [oletrucks] Stop light wiring
From: "Gary L. Perry" <glperry@fwi.com>
Date: Wed, 4 Apr 2001 01:11:15 -0500
I have a 54 with a turn switch that had a wire not hooked up at time I
bought it. I was trying to use my brake light elements in taillights w/out
running extra wire and another lite. I hooke a wire from the brake switch to
the extra wire and it ran brake lights AND allowed signal to work. I only
have 3 wires to my flasher, maybe one of your four is that wire I mentioned
I used.

----- Original Message -----
From: <50chevy@iwon.com>
To: "OleTrucks List" <oletrucks@autox.team.net>
Sent: Tuesday, April 03, 2001 10:54 PM
Subject: [oletrucks] Stop light wiring


> All,
>
> Thanks for the replies on my wiring question.  Here is some additional
info
> to clarify:
>
> Chevrolet Shop Manual shows the headlight switch with a terminal for
stoplamps.
> Chevy Duty wiring harness has a wire which hooks to this terminal (as
orginal
> did) and goes to fuse box. From fuse box, it goes to stop light switch.
> (Brake light previously worked, so I'm assuming stop light switch is still
> good.) I attached the stop light wire to the battery terminal on the
headlight
> switch with no luck, but now believe the problem lies with the turn signal
> unit.  The turn signals did not work when I bought the truck a few months
> ago.
>
> The unit is a Signal-Stat 902 Sigflare.  The turn signal wiring harness
> only has 4 wires. 2 (blue & yellow) are wired into the flasher base. The
> other 2 (red and green) are left and right turn signal indicators. I
successfully
> wired the front & rear wires from the new harness into the red and green
> wires gave me working turn signals.  However there is no wire in the turn
> signal unit to send to the stop lamp switch on the firewall.  The signal
> unit looks original (read: old) and the wires coming out of the unit are
> wrapped with electrical tape and don't appear to have been tampered with.
>
> Any ideas on what to try now?
>
>
> Thanks,
>
> Ray
> '50 3100
>
>
> PS - Thanks to Jim H. for the great color wiring diagram. (It also shows
> the stop lamp terminal on the headlight switch.)
>
>
>
> --
> iWon <http://www.iwon.com/> - Voted the #1 portal on the Web!
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>