At our house we would blame a thing like this on the cat!
Dave Shier
"William M. Schickling" wrote:
> List,
>
> I am disassembling a 1960 235 for a rebuild. Two questions.
>
> I have removed the two cam thrust plate screws. The engine is upside down
> with the oil pan off and the crank removed. 1. The cam moves forward about
> 1/4 inch and then clunks into something. What else do I need to remove to
> get the cam out ? Does the front end plate need to come off ?
>
> I came home to find the cool little box I made to keep the valve train in
> order on the floor with some of the push rods lying on the floor. I have no
> way figuring out now which ones went where. Do I need to buy new or can I do
> anything to save what I have.
>
> Bill Schickling
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|